 Friends links |
|
| Picture |
Heading |
Updated |
 |
Medium-silver Copper Phosphorus Brazing Alloy
The product is used for brazing of copper ,copper alloys and other alloys. It has lower melting point,more excellent fluidity, better brazing properties than the low-silver copper phosphorus brazing alloy. The brazing joint has high mechanical strength an |
2017-12-24 |
 |
Tin Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. |
2017-12-08 |
 |
Silver-aluminium Alloys
Aluminum alloy solders are applied for joinning aluminum to aluminum alloys. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to be removed, furthermore the brittle intermetallic compounds formed by |
2017-11-27 |
 |
Bronze Brazing Paste
After the preparation of bronze brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage. Product is suitable for brazing copper, bronze and steel, et |
2017-11-15 |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-11-13 |
 |
Silver Paste
After the preparation of silver brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage。The product can be used to complex structure, with higher bra |
2017-10-29 |
 |
Silver Power
The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。 |
2017-10-03 |
 |
Pure Copper Paste
Pure copper brazing can be made into paste. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. The roduct is suitable for brazing copper, bronze and steel, etc. |
2017-10-02 |
|
