 Friends links |
|
| Picture |
Heading |
Updated |
 |
Silver-copper-tin Brazing Alloys
Silver-copper-tin brazing alloys is a kind of silver-based solid solution. It has goodproperties such as excellent wettability and ability to fill the clearances, good plasticity and electrical conductivity. |
2017-09-20 |
 |
High Silver Brazing Alloy
High Silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. |
2017-09-09 |
 |
Phoscopper Brazing Alloy
Copper phoscopper brazing alloy are principle elements of the product, it owns good fluidity and is applied in the resistance brazing, flame brazing and high frequency brazing. It is used in brazing of copper and copper alloys, but not in brazing of ferro |
2017-09-03 |
 |
Manganese Bronze Brazing Alloy
Manganese bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.The wettability of brazer |
2017-08-30 |
 |
Flux-cored Aluminium Brazing Alloy
The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-08-23 |
 |
Phosphorus Tin Silicon Brazing Alloy
Copper phosphorus is principle elements of the product, with the tin, antimony and other elements. Brazing temperature is low. It is applied in the resistance brazing, flame brazing and high frequency brazing. |
2017-08-16 |
 |
Silicon Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean |
2017-08-08 |
 |
Sn-Ag-Cu Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-07-30 |
|
